Your IP-address: 3.12.136.231
Your country: United States
RU
EN
UPS Assistant 2.4.2.114 |
Feedbacks
Read more >
| SUPPORT THIS PROJECT >>> |  |
 |
Subscription to UPS Assistant newsletterYou will receive information on the development and roadmap of UPS Assistant project, notifications about every new release and instructions on how to get it.Click on the link below to join UPS Assistant mailing list! Subscribe |
UPS Assistant is intended for monitoring of status of the Uninterruptible Power Supply (UPS), connected to a computer through USB- or COM-port and supporting the Megatec/Centralion protocol (Ippon, Mustek, Sven, Inelt).
Author: Alexey V.Voronin
License: Freeware
Requires: Windows 2000, XP, 2003, Vista (x86 and x64), Windows 7/Windows Server 2008 R2 (x86 and x64), Windows 8/Windows Server 8 (x86 and x64).
UPS Assistant is provided "as is", with no warranties whatsoever.
UPS Assistant is distributed under CC BY-ND 3.0 license ("Attribution-NoDerivs").
 |
Supported UPSes |
Downloads:
 |
MD5: 535ef990e3720dbc5ca3d60418476180 UPS Assistant 2.4.2.114 - 1,01 MB (released January 19, 2016) - Download From https://www.foxylab.com |
Features UPS Assistant -
* following UPSes are supported (tab "UPS Information"):
:-
- VID=$06DA, PID=$0003 - IPPON Mustek/Sven;
- VID=$0F03, PID=$0001 - Inelt
- VID=$0665, PID=$5161 - IPPON/Mustek/Sven
- /Ivvvv:pppp
- vvvv
- pppp
- "C:\Program Files (x86)\Alexey V.Voronin\UPS_Assistant\UPSAssistant.exe" /I12A5:B678
- 0x12A5
- 0xB678
To determine VID/PID your UPS can use the "Device Manager" Windows. In the list of devices UPS will be presented in the section "Human Interface Devices" as "HID-compliant device". In the "Properties" of the device open the tab "Details" and see the property "Hardware Ids" - the first line of the form
- HID\VID_06DA&PID_0003...
- 06DA
- 0003
Example of determination of VID/PID:
* monitoring of status of the UPS, connected to a computer through USB- or COM-port (tab "UPS Status"):
(connection type is displayed by picture in the program window: USB
or COM 
)
AVR:
TRIM - UPS is trimming incoming voltage (called "buck" in some hardware)
BYPASS - UPS bypass circuit is active - no battery protection is available
BOOST - UPS is boosting incoming voltage
OL/OB/OFF - UPS modes:
- OL - on line
- OB - on battery (inverter is providing load power)
- OFF - UPS is offline and is not supplying power to the load
* logging accidents with the possibility of clearing (tab "UPS Status")
and saving to a text file 
* ability to set in tab "UPS Information" the UPS label
that is displayed in reports/warnings via Web, e-mail and LAN* submitting reports on the status of the UPS with a given frequency and warnings of emergency situations via e-mail (tab "Settings")
(requires prior connection to the Internet)
Host - SMTP server address
Port - SMTP server port (default 25)
Login - account name of SMTP server
Password - account password of SMTP server
Authentication - enable the authentication
TLS - enable the SSL/TLS encryption (required by most SMTP-servers)
From - sender e-mail address
E-Mail - recipient e-mail address
Subject - subject of test message
Setting examples:
to be sent via SMTP-server gmail.com:
Host - smtp.gmail.com
Port - 465
Authentication must be enabled
TLS must be enabled
to be sent via SMTP-server mail.ru:
Host - smtp.mail.ru
Port - 465
Authentication must be enabled
TLS must be enabled
fields Login and From must be the same
to be sent via SMTP-server yandex.ru:
Host - smtp.yandex.ru
Port - 465
Authentication must be enabled
TLS must be enabled
fields Login and From must be the same
The choice of parameters to be included in the report, and emergency situations in which sends a warning:
The button
to send test messages.
- the inclusion of sending reports on the status of UPS e-mail with a given frequency
- the inclusion of sending warnings to emergency situations via e-mailWhen successfully sent email to the status bar displays the message "Report sending O.K.".
If you specify an incorrect user name or password, the status bar displays the message "Username and Password not accepted" - for Gmail.
If not enabled mail server authentication is required, the status bar displays the message "Authentication Required" - for Gmail.
If you send are given various fields Login and From, and mail server expects that they will be the same, the status bar displays the message "sender address must match authenticated user" - for the Mail.Ru.
Example report on the status of UPS:
-
Subject: Report - 29.06.2008 20:06:04
Report - 29.06.2008 20:06:04
VID: 0x06DA PID: 0x0003 Product: USB UPS
I/P Voltage = 221.8 V
I/P Fault Voltage = 222.3 V
O/P Voltage = 222.3 V
O/P Current = 028 %
I/P Frequency = 49.9 Hz
Battery Voltage = 13.5 V
Temperature = 25.0°C
UPS Status = 00001001
-
Subject: Warning - Power fail
Warning - 29.06.2008 20:26:26 Power fail
VID: 0x06DA PID: 0x0003 Product: USB UPS
Server Name - name of the computer receiving messages (default, the name of your computer)
The choice of parameters to be included in the report, and emergency situations in which sends a warning:
The button
to send test messages. - the inclusion of sending reports on the status of UPS with a given frequency - the inclusion of sending warnings to emergency situationsExample report on the status of UPS:
An example of an emergency warning:
* toggle UPS beeper
* UPS battery test in 10 seconds
* UPS battery test for specified time period
)program asks to specify the duration of the test
(this command is not supported by all UPS)
* test until battery low
)(this command is not supported by all UPS)
* cancel Test
)(this command is not supported by all UPS)
* suspend
, hibernate 
, shutdown 
(force - 
)* suspend, hibernate, shutdown at power fail (force -
):- at a voltage reduction on battery below admissible
- through the set interval of time
This may automatically switch off the UPS (delayed 5 minutes) when the emergency shutdown or move into hibernation and then automatically UPS activate when restoration of power failure - "UPS Shutdown" - command "S" ( "Shut Down Command") (Note - this command is not supported by all UPS)
* choice of used commands of Megatec/Mustek protocol
(for the changes to take effect must restart the program)
* autorun with Windows
* adjustment of an interval of updating of the information on a status of the UPS
* possibility to turn off the tooltips - "Balloon Hints"
* save setiings in Windows registry:
- on click the button
- at an exit from the program
* HTTP-server to receive reports via the Web with the possibility of user authentication (tab "Settings")
- Enabled - on / off HTTP-server
- Port - port of HTTP-server
- Authentication - the use of user authentication when accessing HTTP-server
- User - user name (if you are using authentication)
- Password - user password (if you are using authentication)
- AutoRefresh - Web-page auto-update after 5 seconds
Start of the program
If the UPS is connected to a COM-port, then when you first start the program requests the number of COM-port
.If the "UPS Rating Information" command ( "F") is not supported or is disabled, the program requests that the battery voltage
.At start the program is turned off in tray and displays the information on a current status of the UPS three possible icons:
- power O.K.;
- AVR;
- power failIf the UPS is supported, then hint appears: USB:
, COM: 
.When you right-click on the icon in the system tray pop-up menu appears:
"Restore" - expand the program window
"Minimize" - minimize window
"Exit" - exit from program.
When you click the left mouse button on the button
in the window title program does not close, but rolled in the system tray.
Screenshots
Power O.K.Power Fail
What is new in UPS Assistant 2.4.2.114
+ added ability to select to send reports by e-mail with/without the use of TLS/SSLRead more >
Leave your feedback!Contacts
